SuperPlus Panel Saw Blades
Features
- Unique triple chip-flat tooth design
- Mirror finished tooth face
- Black Belt Technology
- N-Form expansion slots
Benefits
- Better cutting edge quality
- Tool life up to 3X longer
- Noise reduction and low vibration
- Reduce downtime
SuperPlus panel saw blades are ideal for Chipboard and MDF panels laminated on both sides, for single or stacked cutting. Provides tool life up to 3 times longer than others. Optional hollow ground tooth geometry is available for veneer and laminates.
44A: SuperPlus Panel Saw Blades
Technical Info
- 15˚ positive hook angle
- 40˚ TCG corner bevel
- 0.4″ drop raker flat top tooth
Part No. | Dia. | Teeth | Bore Size | Kerf | Plate | Keyways or Holes
Qty.-Dia.-B.C. |
SC400 | 220 mm | 60 | 30 mm | 3.2 mm | 2.2 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
SC401 | 250 mm | 78 | 30 mm | 3.2 mm | 2.2 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
SC402 | 280 mm | 60 | 30 mm | 3.2 mm | 2.2 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
SC403 | 300 mm | 90 | 30 mm | 3.2 mm | 2.2 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
SC404 | 350 mm | 102 | 30 mm | 3.5 mm | 2.4 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
44B: Triple Chip - Flat Top Saw Blades
Technical Info
- 18˚ positive hook angle
- 45˚ TCG corner bevel
- 0.5″ drop raker flat top tooth
Part No. | Dia. | Teeth | Bore Size | Kerf | Plate | Keyways or Holes
Qty.-Dia.-B.C. |
SC410 | 300 mm | 60 | 30 mm | 4.4 mm | 3 mm | 2 ph 10/60 |
SC411 | 300 mm | 72 | 75 mm | 4.4 mm | 3 mm | |
SC412 | 305 mm | 60 | 30 mm | 4.4 mm | 3 mm | 2 ph 10/60 |
SC413 | 350 mm | 72 | 30 mm | 4.4 mm | 3 mm | 2 ph 10/60 |
SC414 | 355 mm | 72 | 30 mm | 4.4 mm | 3 mm | 2 ph 10/60 |
SC415 | 355 mm | 72 | 75 mm | 4.4 mm | 3 mm | |
SC416 | 380 mm | 72 | 60 mm | 4.8 mm | 3.5 mm | 2 ph 14/100 + 2 ph 14/125 |
SC417 | 400 mm | 72 | 30 mm | 4.25 mm | 3 mm | |
SC419 | 400 mm | 72 | 30 mm | 4.4 mm | 3.2 mm | |
SC418 | 400 mm | 72 | 75 mm | 4.4 mm | 3 mm | 4 ph 15/105 |
SC420 | 420 mm | 72 | 60 mm | 4.8 mm | 3.5 mm | 2 ph 14/125 |
SC428 | 430 mm | 72 | 80 mm | 4.4 mm | 3.2 mm | |
SC421 | 450 mm | 72 | 30 mm | 4.4 mm | 3.2 mm | 2 ph 10/60 |
SC422 | 450 mm | 72 | 30 mm | 4.8 mm | 3.5 mm | 2 ph 8.5/60 |
SC423 | 450 mm | 72 | 60 mm | 4.8 mm | 3.5 mm | 2 ph 14/125 + 2 ph 19/120 |
SC429 | 450 mm | 72 | 80 mm | 4.8 mm | 3.5 mm | 4 ph 19/120 + 2 ph 9/130 |
SC424 | 480 mm | 72 | 80 mm | 4.8 mm | 3.5 mm | 4 ph 19/120 + 2 ph 9/130 |
SC425 | 500 mm | 72 | 60 mm | 4.8 mm | 3.5 mm | 2 ph 11/115 |
SC426 | 570 mm | 60 | 60 mm | 4.8 mm | 3.5 mm | 2 ph 19/120 |
SC427 | 600 mm | 60 | 60 mm | 5.8 mm | 4 mm | 2 ph 11/115 + 2 ph 19/120 |
44B: Triple Chip - Flat Top Saw Blades
Technical Info
- 15˚ positive hook angle
- 30˚ TCG corner bevel
- 0.4″ drop raker flat top tooth
Part No. | Dia. | Teeth | Bore Size | Kerf | Plate | Keyways or Holes
Qty.-Dia.-B.C. |
SC441 | 250 mm | 48 | 30 mm | 3.2 mm | 2.2 mm | 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60 |
Safety Guidelines
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).
WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.