Woodworking tools cutting tools manufacturers hydro grip type CIR

HYDRO-GRIP Type CIR – Stainless Steel

Applications

  • Extremely accurate mounting system for use on non-threaded arbors

Advantages

  • Manufactured from stainless steel
  • Capable of ultrasonic cleaning as one unit with the tooling
  • Increase feed rates by 30-50%
  • Also, near perfect concentricity on the OD
  • In addition, excellent repeatability of the cutting circle ensures that all of the knives/wings cut effectively
  • Reduces set up time because the cutting tool and sleeve remain as one unit. Therefore, no assembly required

Technical Information

  • Type CIR sleeves are interchangeable between various cutting tools and are retained by screws
  • When pressurized: inner sleeve expands towards the spindle and the outer sleeve expands towards the tool

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.